The one thing that is known to be the most fragile is Glass. Primarily, Glass consists of limestone, soda, and sand, along with various clarifying agents. To understand the manufacturing excellence of a Mac glassware manufacturing factory (โรงงาน ผลิต แก้ว มัค, which is the term in Thai), you have to know the manufacturing details.
Let us delve deep into the process of manufacturing glass to get a proper understanding.
● Collecting Raw Materials
The main components of Glass comprise calcium oxide, silica sand, and magnesium. One has to mix these into batches and then recycle them. Make sure that you use a cullet as it reduces energy consumption. Before mixing the raw materials, one has to look for their quality. You can only get superior quality if you invest in pure natural materials. Also, a dedicated plant can help extract the excess iron content from the materials.
● Melting Them In The Furnace
The raw materials need to be accumulated and passed into a mixing silo. At this point, you need to put the solution into a five-chambered furnace. Make sure that the temperature of the furnace reaches up to 1600°C.
● Drawing The Molten Glass
As soon as the Glass melts, it must be floated on the molten tin. It should be done at a temperature of 1000 degrees Celsius. As the Glass goes through the complex process involving roll machines, one would get perfectly flat glasses.
● Cooling Them
As soon as the molten Glass comes out of the furnace, it is time to leave it at 680 Celsius. The Glass will take in the desired shape and consistency in this process. This process modifies the internal stresses of the Glass. After that, one can try flat on the Glass as per the desired shape and size. Only after doing this particular process the Glass requires no polishing or grinding.
● Quality Check
Once the concussion cools down, it undergoes a variety of quality checks. You can cut them into a variety of sizes and shapes. At the same time, one can also pay special attention to the quality.
Final Thoughts
Glass is a material that immediately increases the size of any establishment. However, one must invest in a complex glass manufacturing process to get the best quality glass. The best quality glass offers full transparency and optimum safety. In some cases, these glasses get repaired with reflective and self-cleaning properties. Especially in cases where one requires the best quality class, one must pay attention to the precision mechanics of the manufacturing factory.
